Twelve five-axis machining centers (Hermle, DMG MORI, Beijing Jingdiao, FEELER), a Makino horizontal machining center, Brother drilling & tapping centers and a Mazak turn-mill cell — prototype to production without tooling constraints, at ±0.003 mm on 5-axis work and ±0.0025 mm on turn-mill.
Complex geometries in single setups: impellers, structural parts, housings and optical components in aluminum, magnesium, brass and steel. 12 five-axis centers, travel up to 1,650 × 800 × 800 mm.
High-volume milling on 30 three- and four-axis centers and Brother high-speed drilling & tapping machines — the cost-effective route for brackets, plates, housings and fixtures.
A Mazak turn-mill cell and 27 CNC lathes (turret and gang-tool) for shafts, bushings, nozzles and medical pins — round parts finished in one chucking, at ±0.0025 mm.
EDM and mirror EDM, medium- and fast-wire cutting, precision surface grinding (Paragon, KENT), sandblasting, wire drawing and laser marking — no outsourcing, no added risk.
Five factors decide most quotes. Knowing them helps you send an RFQ that prices fast — and fairly.
| Tolerance grade | Tighter grades move the part to 5-axis, grinding or EDM — a process step, not a percentage | Call tight tolerances only on functional features |
| Material | Titanium, Inconel and similar exotics cut slower and consume more tooling | State where 6061 or 316L can substitute |
| Quantity & setup | Setup amortizes over the batch; small batches carry it alone | Give the real annual volume, not just the first PO |
| Surface treatment | Anodize, plating and paint add process steps and lead time | Group parts by finish and state the standard |
| Inspection & documentation | FAI and CMM reports add inspection hours | Ask for the reporting level you actually need |
Our weekly palette runs from 6061 and 7075 aluminum to 17-4PH, PEEK and Inconel. Unusual spec? Send it over — chances are it is already on the shelf.
Quality & Equipment → Parts gallery →
Photos partially processed for customer privacy protection.
